(1) Adjusting the front bezel

Put the back baffle against the lower blade, and then put the sample plate against the back baffle, and put the front baffle against the sample plate and fix it. Loosen the back baffle plate, remove the sample plate, install the sheet material and cut.

(2) Adjusting the tailgate

Level and align the sample plate with the lower blade, then close the back baffle plate against the sample plate and fix it, remove the sample plate, and then install the plate for cutting.

(3) Adjust the angle baffle

First, place the template on the table to align the lower blade, adjust and fix the angle baffle, then adjust the back baffle according to the template, and use the angle baffle and the back baffle to locate during the cutting process.