Cleaning of stainless steel bending machine mold:
1. Cleaning of surface dust: This is the most basic cleaning work. It can be cleaned with a clean rag. After touching it, touch it with your hands to see if there is dust.
2. Mold guide bush, guide post: The mold guide bush, guide post and guide block are mainly caused by oil accumulation, so when cleaning, first clean these parts with a rag, and then apply an appropriate amount of lubricant. .
3. Punching part: The main object of this part cleaning is the waste sticking in the hole, the sliding plate and the cutting edge. You can use a hammer and other tools when cleaning.
4, the coating mold: first clean the stretched surface of the mold, and then make sure that the surface is smooth and then apply a little oil to the mold.